Automatic feeding system, automatic metering system, powder metering and weighing central feeding system can improve the degree of production automation, speed up production efficiency, improve product quality, improve production environment, improve the image of the enterprise, is an indispensable important equipment in the injection industry. In order to make the central feeding system run stably for a long time, it is necessary to maintain the parts of the central feeding system and reduce the occurrence of failure. Then how to maintain the parts of the central feeding system? The following Heng Rong technicians analyze and answer:
Central Feeding System Accessories
1. Central console
Clean up the dust and debris on the touch screen in time, after the touch screen operation must be on the protective cover; periodically check whether the PLC port is loose, if there is need to tighten; check whether there are sharp objects around, if there is need to remove.
2. High Pressure Fan
Lubricating oil is added regularly to gears and dust must be cleaned up at the same time, especially pulsating dust collector. Otherwise, the dust entering the fan will increase and the negative pressure of feeding material will be weakened.
3. Central filter
If it is found that the amount of suction is reduced, the filter element on the central safety filter is removed to remove the dust attached to it, so as to maintain good ventilation and enhance suction.
4. Electric Eye Hopper
Dust will adhere to the inner wall of the glass tube after the electric eye hopper is used for a period of time, so it needs a week to check and clean up the dust of the glass tube to ensure the normal operation of the level sensor.
5. Closure Valve
Regularly adjust the air-conditioning valve, so that the cylinder has a suitable speed of action. Because the cylinder speed is too fast will cause the service life of the silicone film, and too slow will not be able to run at the pace.
6. Material level switch
Special attention should be paid to keeping the power signal line of the level switch in a natural state and never tightening it. In addition, the air source must be cleaned, otherwise, air and water will damage the valve spool after entering the solenoid valve, affecting the work.
I'll share with you today about how to maintain the parts of the central feeding system. Maintenance of central feeding system spare parts can effectively prolong the service life of equipment and bring more benefits to enterprises, which requires constant attention.