天富娱乐登录测试

about us
current position: HOME >> Tonnage bag unloading station >>
Tonnage bag unloading station

Tonnage bag unloading station

  • category:Tonnage bag unloading station
  • Release date:2019-08-06
  • product description
  • Performance characteristics
  • Technical Parameters


I. Product Overview:

The tonnage bag dustless feeding station, also known as the big bag opening station, refers to the vehicle lifting the tonnage bag to the top of the unloading hopper, manual or mechanical unloading of the tonnage bag packing material, during the whole unloading process, the filter and dust removal fan carry out dust removal, dust will not leak out, suitable for 1000 KG tonnage bag packing powder granular material.

The dustless feeding station equipment is a set of combination, which is composed of a large set of frame, dumper lifting frame components, electric hoist (traveling crane), traveling cable, dumper bin, dumper operation table, external dust collector, and electrical system. Through the special dust collector, the raised dust can be collected, filtered and purified, and discharged to meet the standard, so as to meet the comprehensive control of dust in various ton bag feeding workshop.



2. Product characteristics:

Dust-free spillover during feeding process can be realized by using dust removal and filtering feeding operation platform.

1. The equipment has the function of dust removal, which can prevent dust from flying in the process of bagging and feeding, and reduce material loss.

2. Vibrating screen can be installed in the dust collecting and bagging station to effectively remove foreign substances in materials.

3. Intelligent control is adopted for the equipment, which is highly automated and easy to operate.

4. No dead angle design inside the equipment, easy to disassemble and clean.

5. Equipment design fully meets GMP requirements.



 

3. Technical advantages:

The electric hoist is fixed on the cross beam of the top frame, and can also be fixed on the floor.

The tonnage bags are lifted by electric hoist to the top of hopper, and the bag mouth extends into the hopper inlet, then the bag clamping valve is closed, the bag rope is unfastened, the bag clamping valve is slowly opened, and the materials in the bag flow smoothly into the hopper.

The material passes through the rotary valve at the lower part of the hopper and enters the bottom pipeline. The compressed gas from the factory can pneumatically convey the material to the destination and complete the work of unpacking and conveying.

For fine powder materials, this set of equipment can be built-in or connected with an external dust collector in order to filter the dust generated during dumping and discharge clean tail gas into the atmosphere, so that workers can work easily in a clean environment.

The overall height can be controlled between 2 and 5 meters to meet the requirements of layer height.

The bottom of the folding machine is fixed with foot bolts and supporting legs. The pre-embedding foundation of the dismantling equipment with height of 5 meters is needed to increase its firmness.






Previous: None
Next: None

Recently Viewed: